Home > Products > Controllers > INDU 22 controller

INDU 22 controller

Industrial microprocessor devices

INDU-22 controller– designed to control devices according to a time algorithm. Controls cyclic switching on and off of actuating devices.
Used to operate vacuum lasing machines, mixers, and timed process control systems.

Ask for a product

Destiny

Tumblers
Food industry

Product features

INDU 22 controller

Product Features:

industrial structure with increased resistance to external conditions and mechanical damage
possibility of installation in "blind" holes (from the front)
very small installation depth
standard installation dimension 96×96 mm
click keys
clear LED displays
ready-made solution without the need to create firmware

Technical parameters

INDU 22 controller

General Information

Power

230 VAC (option: 24, 110)
Power consumption

4,2 VA
Accuracy

0.1 ° C

Physical parameters

Measurements

Mounting hole dimensions: 93×93 mm
Installation depth with connections: 68 mm
External dimensions of the frame with seal: 144×144 mm
Weight

600 g

design

display

LED ½'' x 4 digits
LED ½'' x 3 digits
LED ½'' x 3 digits
Housing

One-piece Front Panel

Features

Level of security

From the connections side: IP 20
From the front: IP 65
Real-time clock

Yes
Digital communication

1x RS 485
Keyboard

7 keys (micro switch)
Recording of measurements

Registration of set and measured values approximately 100 registrations
startup

Possibility to start the process at a selected time or after a set time
Other

Conditional process end, programmed in SETUP
Load capacity of relay contacts

Recommended external protection – fuse: 6,3 A
Maximum total current (bus) – 4ATTENTION! It is not recommended to use fuses larger than 6,3 A
Meets the standards

Compliant with Directive: 89/336/EEC as amended
91/263 / EEC
92/31 / EEC
93/68 / EEC
PN-EN 60751 +A2:1997
PN-92 / E-08106
PN-EN 50082-2: 1997
PN-EN 61000-4-5:1999
PN-EN 61000-4-4: 1999
PN-EN 61000-4-2: 1999
EN 61000-4-11: 1997
PN-EN 61000-4-8:1998
PN-EN 60584-1: 1997
PN-89/M-53859

Software

Software

INDU monitor

Inputs / outputs

Entrances

2 digital potential-free:
Control inputs: closed to system ground
Maximum resistance of a closed contact 100 Ω
Minimum open contact resistance 10000 Ω
outputs

1 relay output, normally open contact (250 VAC/8A)
4 switching relay outputs (250 VAC/8A)