MICROPROCESSOR CONTROLLER INDU-22

POWER SUPPLY:

• 230 VAC (optional: 24, 110)

POWER CONSUMPTION:

• 4.2 VA

ACCURACY:

• 0.1 °C

DIMENSIONS:

• Mounting hole dimensions: 93x93 mm
• Installation depth with connections: 68 mm
• External dimensions of the frame with seal: 144x144 mm

DISPLAY:

• LED ½’’ x 4 digits
• LED ½’’ x 3 digits
• LED ½’’ x 3 digits

WEIGHT:

• Controller: 600 g

ENCLOSURE:

• Monolithic type Front Panel

PROTECTION RATING:

• From the connections’ side: IP 20
• From the front: IP 65

OPERATING CONDITIONS:

• Operating temperature -10 °C .. +55 °C
• Storage temperature -15 °C .. +60 °C

DIGITAL COMMUNICATION:

• 1x RS 485

TYPE OF REGULATING DEVICE:

• No

KEYBOARD:

• 7 keys (micro switch)

MEASUREMENTS RECORDING:

• Recording set and measured values – ca. 100,000 records.

REAL TIME CLOCK:

• Yes

PC SOFTWARE:

• Monitor INDU

AUTOSTART

• possibility of starting the process at any time or after a set period

INPUTS:

• 2 potential-free digital inputs:
  Control inputs: contact to GND
  Maximum resistance of closed contact 100 Ω
  Minimum resistance of open contact 10,000 Ω

OUTPUTS:

• 1 relay output contact switch (250 VAC/8A)
• 4 switching relay outputs (250 VAC/8A)

MISCELLANEOUS:

• conditional process termination, programmed from SETUP.

RELAY CONTACT RATED LOAD

• Recommended external protection - fuse: 6.3 A
• Maximum total current (bus) -4A

  CAUTION! Using fuses over 6.3 A is not recommended

COMPLIANCE WITH STANDARDS:

• According to directives: 89/336/EEC as amended 
  91/263/EEC
  92/31/EEC
  93/68/EEC
• PN-EN 60751 +A2:1997
• PN-92 / E-08106
• PN-EN 50082-2:1997
• PN-EN 61000-4-5:1999
• PN-EN 61000-4-4: 1999
• PN-EN 61000-4-2: 1999
• EN 61000-4-11: 1997
• PN-EN 61000-4-8:1998
• PN-EN 60584-1:1997
• PN-89/M-53859