Industrial microprocessor devices Microprocessor controller MCM-021 – designed for programmatic, step-wise control of devices based on time cycles in which regulation is carried out in vacuum.
industrial structure with increased resistance to external conditions and mechanical damage,
possibility of installation in "blind" holes (from the front),
very small installation depth,
click keys,
clear LED displays,
ready-made solution without the need to create firmware.
Technical parameters
MCM 021 controller
General Information
Power
24 VAC
Power consumption
10 W
Physical parameters
dimensions
Mounting hole dimensions: 143×238 mm
Installation depth with connections: 47 mm
External dimensions of the frame with seal: 187x280mm
Weight
Driver: 1250 g
Transformer: 800 g
design
display
LED ½'' x 4 digits LED ½'' x 2 digits
LED ½'' x 2 digits LED ½'' x 2 digits
LED ½'' x 2 digits
Housing
One-piece Front Panel
Features
Level of security
From the connections side: IP 20
From the front: IP 67
Real-time clock
Roof
Temperature measuring range
No
Digital communication
No
Regulator type
No
Keyboard
27 "CLICK SWITCH" keys
Recording of measurements
No
startup
Roof
Other
Manual operation mode,
Program control of executive devices (contactors, solenoid valves, etc.)
Programs
50 (0..49) technological programs, freely changeable by the user, 6 cycles per program, maximum cycle time 100 hours, 2 phases per cycle, maximum phase time 99 minutes
Moisture measurement
No
Pressure/vacuum measurement
Roof
Software
Software
No
Inputs / outputs
Entrances
Vacuum input (built-in transducer)
outputs
Relay outputs: 8
(Relay output type: Normally Open 250V
Total current of connected relays: Iomax = 5A)
Operating mode
Working conditions
Operating temperature -20 °C .. +60 °C
Storage temperature -20 °C .. +70 °C
Humidity: 0..75%
